Nyc gov dep Please Correct the Errors Below and Try Again House Number Is Invalid

The Windows Help programme is not supported in Windows 10, Windows Server 2012 or later versions of Windows Server. The Windows Help program is bachelor for Windows Vista, vii, 8 and 8.ane only.

Microsoft strongly recommends that software developers discontinue using the Windows Aid awarding. Software developers who ship programs that rely on .hlp files are encouraged to transition their Help experience to an culling Help file format, such as CHM, HTML, or XML. For more data see the MSDN commodity Which Version of Assist exercise I Need? While Microsoft develops future Help technologies, we encourage Help authors to keep using HTML Help ane.4. HTML Help 1.4 is included in Windows versions starting with Windows 7.

Symptoms

When you endeavour to open up Assist in Windows-based programs, yous receive one of the post-obit error letters.

The Help for this program was created in Windows Help format, which was used in previous versions of Windows and it is not supported in Windows Vista.

The Assist for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows. However, you can download a plan that will allow you to view Help created in the Windows Help format.

The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows. For more information, become to the Microsoft Help and Support website.

Resolution

To view 32-bit Help files with the .hlp file extension in Windows, y'all will need to download and install WinHlp32.exe from the Microsoft Download Heart.

• 4013443 WinHlp32.exe for x86-based versions of Windows viii.one

• 4013443 WinHlp32.exe for x64-based versions of Windows eight.ane

• 4013443 WinHlp32.exe for Windows 8

• 4013443 WinHlp32.exe for Windows 7

• 4013443 WinHlp32.exe for Windows Server 2008

• 4013443 WinHlp32.exe for Windows Server 2008 R2

• 4013443 WinHlp32.exe for Windows Vista

Important notes for downloading this program

• Open up the links past using Internet Explorer.

• If you encounter a "Validation Required" bulletin when you open up the download page, click Continue, and then follow the on-screen instructions.

• When you are prompted to download the file, select the file name that contains "x64" for 64-bit versions of Windows or "x86" for 32-scrap versions of Windows. Use the following machine-detection information to make your choice.

• The Windows Help program is not supported in Windows Server 2012 or later versions of Windows Server.

If you come across bug when you install WinHlp32.exe or use Assist, go to the "More than data" section.

More information for avant-garde users

This trouble occurs when Windows Aid uses an earlier version of the Windows Assistance program (WinHlp32.exe) to display content.

Known issues that may occur when you install WinHlp32.exe

Windows Update error 80070422

Manually fix this problem

If y'all receive Windows Update error 80070422 when you lot download the WinHlp32.exe update, you may have to alter the Windows Update service settings, so restart the service. To do this, follow these steps:

1. Click Start, and type Services in the Start Search or Search Programs and files text box.

2. Double-click Services from the Programs list. If yous are prompted for an administrator password or for confirmation, type the password, or provide confirmation.

3. Right-click the Windows Update service, and then click Properties.

4. On the General tab, make sure that Automatic is selected next to Startup type.

5. Side by side to Service status, check whether the service is started. If it is not started, click Start. If you are prompted for an administrator password or for confirmation, type the countersign, or provide confirmation.

6. Click OK.

Known issues that may occur later yous install WinHlp32.exe

The following list shows the known functionality regressions from previous releases of WinHlp32.exe. The following known issues apply only to the version of WinHlp32.exe that is discussed in this article.

• Macros are disabled

  By default, the following macros are disabled in Windows Assistance:

  • ExecFile

  • RegisterRoutine

  • ShellExecute

  • ShortCut

  • Generate

  • Examination

  • ExecProgram

  Notwithstanding, all other macros in .hlp files volition part as they did in past releases. Therefore, if an .hlp file that depends on these macros is opened after you install Windows Help for Windows Vista, Windows 7, Windows Server 2008, or Windows Server 2008 R2, some functionality of the file may not piece of work correctly. If this occurs, you may receive the following error message:

  There was a problem running the macro. (1037)

  If you take to use these macros, you can turn them on by using the Grouping Policy workaround or the registry workaround that is described in the "Registry entries and group policies for network administrators" department.

• Cannot access .hlp files that are stored on intranet sites

  Past default, you cannot use WinHlp32.exe to access .hlp files that are stored on intranet sites. If you endeavour to open a remote file, you receive the post-obit fault message:

  Cannot display this help file. Try opening the help file once more, and if you still receive this bulletin, copy the help file to a dissimilar drive, and effort once again.

  If yous have to access .hlp files that are stored on intranet sites, you can unblock them by using the Group Policy workaround or registry workaround that is described in the "Registry entries and group policies for network administrators" section.

• Noninteractive user access is blocked

  Access has been blocked to .hlp files past noninteractive users, such as system processes. The user does not receive an error message when this error occurs.

• Drag-and-drop functionality is disabled

  Back up for elevate-and-drop functionality in the application has been disabled. The user does not receive an mistake message when this error occurs.

• Dependencies on "How to Utilise Assistance" files

  The Help files that are titled "How to Utilise Help" were removed from Windows Vista and Windows Server 2008. The following files were removed:

  • Windows.hlp

  • Winhlp32.hlp

  • Winhlp32.cnt

  • Winhelp.cnt

  • Nocntnt.cnt

  Notes

  • These files are not included in Windows 7 or in Windows Server 2008 R2.

  • The .hlp files that depend on these files may return an error when you try to open up them.

How to address compatibility issues that are related to WinHlp32.exe

Yous can use the WinHlp32.exe to view 32-bit Help files. This release provides Group Policy settings and registry subkeys that you tin can use to work around awarding-compatibility issues. For example, the Grouping Policy settings and registry subkeys can be used to resolve issues that are related to macros in .hlp files and to admission .hlp files that are stored on intranet sites. Nevertheless, if users view Help files from an unknown source, the estimator will be put at more risk if they enable these policies or these settings. Therefore, y'all should use caution when you determine whether to implement the application-compatibility workarounds that are described in this section.

Utilise the following questions to decide whether to install WinHlp32.exe, and which policy changes and registry changes to make.

• Practice yous have to have the applications and the functionality that are affected by the removal of WinHlp32.ex?

  • How many applications require WinHlp32.exe? How many applications are afflicted by the functionality changes? How important are these applications?

  • How severe is the malfunction that's acquired by the changes?

• What are your security requirements and security capabilities?

  • Which is more important: That you tin can use the WinHlp32.exe functionality or that you lot make certain that your security is as strong as possible?

  • Do external security measures, such every bit a local or a corporate firewall, give you sufficient confidence that you can install WinHlp32.exe and make the policy changes or the registry changes that are described in this commodity?

• If you lot are in an organization, does your organisation deliver content in the .hlp format?

  • Tin can y'all change the program or the contents and so that they do not accept to utilise WinHlp32.exe functionality? For case, can you convert the help content that is currently in the .hlp format to an culling file format such as .chm, .html, or .xml?

  • Does your arrangement store .hlp files on an intranet site? Can you install these files locally instead?

How to enable macros on a unmarried reckoner subsequently you install WinHlp32.exe

After you lot install the WinHelp32.exe program that is discussed in this article, certain macros are disabled. For more than information about this issue, see the "Known bug" section.

This section contains steps to re-enable these macros by modifying a registry key. If your computer is in a managed environment, do not follow these steps without first consulting with your IT department. IT departments may decide not to re-enable macros or they may determine to re-enable them by using group policies. Information technology departments should read this commodity in its entirety before you continue.

Alert This article offers information nearly how to piece of work effectually issues that are caused past changes in this release of Windows Help. However, Microsoft makes no specific recommendations about which registry keys and which values are right for your unique environment. If you are in a managed surroundings, your IT department is the all-time judge of how to weigh the advantages of these workarounds against the risks of using them. The safer form is to use no registry workarounds at all.

Annotation To perform the steps in this task, you must be logged on to the estimator by using an administrator business relationship. By using an ambassador account, you can make changes to your calculator that yous cannot make with any other account, such equally a standard account.

To log on by using an ambassador business relationship, you must know the countersign for an ambassador account on your estimator. If you are performing these steps on your personal calculator, you are probable already logged on by using an administrator business relationship. If you are performing these steps on a computer at piece of work, you might have to ask the arrangement administrator for assistance.

Manually enable macros on a single reckoner

Important
Follow the steps in this section carefully. Serious problems might occur if you modify the registry incorrectly. Before you modify it, dorsum up the registry for restoration in case problems occur.

To enable macros on a unmarried figurer later on you lot install WinHelp32.exe, follow these steps:

1. Log on by using an administrator account.

2. Press the Windows logo key + R, type regedit, and and so click OK.
   If you lot are prompted for an administratorpassword or for confirmation, type the countersign, or click Continue.

3. On 32-bit editions of Windows, locate and then select the following registry subkey:

   HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft
   On 64-chip editions of Windows, locate and then select the following registry subkey:

   HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft

4. On the Edit menu, point to New, and and so click Key.

5. Type WinHelp, so press Enter.

6. Click the WinHelp primal.

7. On the Edit carte, indicate to New, and and then click DWORD (32-bit) Value.

8. Type AllowProgrammaticMacros, and so press Enter.

9. On the Edit menu, click Modify.

10. In the Value data box, type 1, click Hexadecimal in the Base area, and then click OK.

11. Get out Registry Editor.

How to unblock .hlp files that are stored on an intranet on a single computer subsequently you install WinHlp32.exe

After you install the WinHelp32.exe file that is discussed in this commodity, .hlp files that are stored on intranet sites are blocked. For more information about this event, see the "Known issues" section.

This article contains steps to unblock these .hlp files by modifying a registry key. If your computer is in a managed environment, practice non follow these steps without first consulting with your IT department. IT departments may make up one's mind not to re-enable macros or they may decide to re-enable them past using group policies.

Important This article contains information that shows you how to help lower security settings or how to turn off security features on a computer. You lot can make these changes to piece of work around a specific problem. Before yous brand these changes, nosotros recommend that you evaluate the risks that are associated with implementing this workaround in your particular surroundings. If you implement this workaround, have whatsoever appropriate additional steps to help protect the computer.

Alarm This article offers information almost how to work around issues that are caused past changes in this release of Windows Assistance. Even so, Microsoft makes no specific recommendations near which registry keys and which values are right for your unique environment. If y'all are in a managed environment, your IT department is the best judge of how to weigh the advantages of these workarounds against the risks of using them. The safer course is to use no registry workarounds at all.

Notation To perform the steps in this task, you must be logged on to the computer by using an administrator account. By using an administrator business relationship, you lot tin make changes to your computer that you cannot make with whatever other account, such as a standard account.

To log on by using with an administrator business relationship, you must know the password for an administrator account on your computer. If you are performing these steps on your personal calculator, y'all are likely already logged on with an ambassador account. If you are performing these steps on a reckoner at work, you might have to ask the organisation administrator for aid.

Manually unblock .hlp files that are stored on an intranet on a single computer

Of import
Follow the steps in this department carefully. Serious problems might occur if you modify the registry incorrectly. Before you lot modify it, dorsum upwards the registry for restoration in case problems occur.

To unblock .hlp files afterward you lot install WinHelp32.exe, follow these steps:

1. Log on by using an administrator business relationship.

2. Press the Windows logo central + R, type regedit, and and so click OK.
   If you are prompted for an administratorpassword or for confirmation, type the countersign, or click Continue.

3. On 32-scrap editions of Windows, locate and and then select the post-obit registry subkey:

   HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft
   On 64-chip editions of Windows, locate and so select the post-obit registry subkey:

   HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft

4. On the Edit carte du jour, indicate to New, and and then click Key.

5. Type WinHelp, and so press Enter.

6. Click the WinHelp cardinal.

7. On the Edit menu, betoken to New, and then click DWORD (32-bit) Value.

8. Type AllowIntranetAccess, and then press Enter.

9. On the Edit card, click Modify.

10. In the Value data box, blazon 1, click Hexadecimal in the Base area, and and so click OK.

11. Exit Registry Editor.

Registry entries and group policies for network administrators

Alert This workaround may brand a computer or a network more vulnerable to set on by malicious users or by malicious software such as viruses. We exercise not recommend this workaround but are providing this data so that you tin can implement this workaround at your own discretion. Utilize this workaround at your own chance.

Alarm This article offers information about how to work around issues that are acquired by changes in this release of Windows Aid. However, Microsoft makes no specific recommendations about which registry keys and which values are right for your organization. Your Information technology department is the best judge of how to weigh the advantages of these workarounds against the risks of using them. The safer form is to use no registry workarounds at all.

The WinHlp32.exe download provides Group Policy settings and registry entries to work around two known problems in this release of Windows Help. By using the post-obit Group Policy settings or registry entries, network administrators and individual users can re-enable macros and unblock .hlp files that are stored on intranet sites. A local computer Grouping Policy setting and a electric current user Group Policy setting are provided as a workaround for each feature. Yous can also use a user registry setting to manage each feature.

For each characteristic, precedence is given in the following club:

• Local computer Group Policy

• Current user Grouping Policy

• User registry setting

If a policy has non been set for a feature, and the user registry setting for the feature has not been ready, the features will behave as described in the "Known issues" section.

Important This section, method, or job contains steps that tell yous how to modify the registry. Notwithstanding, serious problems might occur if y'all modify the registry incorrectly. Therefore, make certain that yous follow these steps advisedly. For added protection, back up the registry before you modify information technology. And so, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Noesis Base:

322756 How to dorsum up and restore the registry in Windows

• How to enable macros

  Network administrators tin can use the Permit programmatic macros in WinHlp32.exe Group Policy setting to plow on or to turn off macros in .hlp files. Administrators can utilize the Group Policy Direction Console (GPMC) to manage this Group Policy setting. For more information about Group Policy, see the "References" section.

  If neither the local calculator Group Policy nor the electric current user Group Policy for this characteristic has been prepare, users tin modify the user registry setting for this characteristic to turn on or to plough off macros in .hlp files. To alter this setting, users must first add the following new subkey to the registry:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WinHelp So, users must add a DWORD value that is named AllowProgrammaticMacros to this subkey. If the value for AllowProgrammaticMacros is set to i, the macros will exist turned on. If the value is set up to 0, the macros volition be turned off. If this registry value does non exist, the macros will exist turned off.

• How to unblock .hlp files that are stored on an intranet

  Network administrators can utilize the Allow WinHlp32.exe to access .hlp files stored on intranet sites Group Policy setting to unblock .hlp files that are stored on the intranet. Administrators tin can utilise the GPMC to manage this Group Policy setting. For more data about Group Policy, see the "References" section.

  If neither Group Policy setting for this feature has been set, users can modify the user registry setting for this feature to block or to unblock .hlp files that are stored on intranet sites. To change this setting, users must first add the following new subkey to the registry:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WinHelp Then, users must add a DWORD value that is named AllowIntranetAccess to this subkey. If the value for AllowIntranetAccess is set to one, the .hlp files that are stored on intranet sites will exist available. If the value is set to 0, the .hlp files that are stored on intranet sites will be blocked. If this registry value does not exist, the .hlp files that are stored on intranet sites will be blocked.

Help content providers who release .hlp files

Starting with Windows Vista, the older Assist component (WinHlp32.exe) is replaced by a new Help component that adds more than functionality for newer versions of Windows.

The WinHlp32.exe technology will not exist supported in its electric current grade in futurity Windows releases. Therefore, nosotros strongly recommend that software developers no longer use this Windows Help program. Software developers who release programs that rely on .hlp files are encouraged to transition their Help systems to an alternative Help file format, such as .chm, .html, or .xml. They volition also have to change their calls from the WinHelp API to the new content source. Several third-party tools are bachelor to help software developers catechumen Help content from one format to another format.

Annotation Windows Vista, Windows 7, Windows Server 2008, and Windows Server 2008 R2 nonetheless includes WinHelp.exe for 16-bit .hlp files. The WinHelp.exe program is a version of Windows Help for 16-scrap .hlp files.

References

kelleyziese1971.blogspot.com

Source: https://support.microsoft.com/en-us/topic/error-opening-help-in-windows-based-programs-feature-not-included-or-help-not-supported-3c841463-d67c-6062-0ee7-1a149da3973b

Share this post